C70X aluminum pipe high precision laser cutting machine

C70X aluminum pipe high precision laser cutting machine

Our high-precision laser cutting machine adopts an independent capacitor height controller and adopts a fully closed-loop control method to control the laser cutting capacitor follower head. It is a high-performance capacitor height controller.

The precautions of C70X aluminum pipe high precision laser cutting machine

• The corners of the workpiece cut by the laser cutting machine melt.

When cutting board corners with a laser cutter, the laser overheats and melts these corners due to the slower cutting speed. The corner produces an irregular arc with a small radius, which keeps the laser cutting speed at a high cutting speed, avoids the overheating and melting of the steel plate when cutting the corner, obtains better cutting quality, shortens the cutting time, and improves production efficiency.

• Pay attention to the component spacing when cutting workpieces with laser cutting machines.

Due to the relatively large factors affected by the heat of the thick plate and the hot plate, when cutting sharp corners and small graphics, the distance between the workpieces is relatively large, which is prone to cracks and affects the quality of the cut workpieces.

• When using a laser cutting machine to cut thicker plates, lead wires need to be set.

At the starting point and end point of cutting, a transition line is often introduced, that is, the lead line and the tail line, to ensure that the seam of the cutting seam is good and avoid burns. Leads and tails do not affect the workpiece itself, so they should be placed out of the scope of the workpiece cut. In addition, be careful not to install wires in places that are not easy to dissipate heat. The connection between the guide groove and the guide groove should adopt a circular arc transition as much as possible to make the machine run smoothly and avoid burns due to corner stops.